When you install this software, it will pick up the IP address of the machine automatically. This is the simplest TFTP server I have come across. Ok, now all that is left is your TFTP server. interface) and you have also told the router the IP address of the TFTP server, right? So you have told the router where the TFTP is attached (i.e. If you have IP #1 and IP #2 on the TFTP server, are you able to ping the TFTP server from the router and vice-versa? You need to establish IP connectivity first otherwise your TFTP will not work.Īssuming your ping to and from the router is working, then you need to put the following command on the router: I don't care about the points, but I can't understand why this does not work. bin ħ) It seemed the problem is related to the "Time out" configuration in the Router?Ĩ) My question: How to solve this problem? (How to extend the "time out"?) Or any other options? The 2nd method: I installed the Putty at the PC, and connect the Router (through "Serial Port") (Using the console cable)Ħ) The copying happened, but failed in the middle the error message:".
The first method: I am using the cross-over cable between the PC and the Router I have to fill in the source filename, address of the remote host and the destination filenameĥ) I am using 2 methods for the communication between the PC and the Router the copying failed and got the same error message I use the ios command: "copy flash tftp" binĢ) I have a PC (with windows 2003 server)Ĥ) I want to copy the Flash (from the router) to the tftp server 1) I have a router (older router) the flash: c1700-sy-mz.
0 kommentar(er)
